Details

---

BUY MAX14753EUE+ https://www.utsource.net/itm/p/6264119.html
IC MULTIPLEXER DUAL 4X1 16TSSOP

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	1.7		3.6	V	Operating supply voltage range
Operating Temperature Range	Toper	-40		85	掳C	Operating temperature range
Output Current	IOUT		200		mA	Maximum output current
Input Voltage Range	VIN	0		VDD	V	Input voltage range
Quiescent Current	IQ		10		渭A	Quiescent current
Shutdown Current	ISD		0.1		渭A	Shutdown mode supply current
Load Switch Resistance	RON		90		m惟	On-state resistance of load switch
Reverse Current	IRV		1		渭A	Reverse current protection

Instructions for Use:

1. Power Supply Connection: Connect the VDD pin to a power supply within the specified voltage range (1.7V to 3.6V). Ensure proper decoupling capacitors are placed close to the power pins to maintain stability.

2. Signal Input: Apply the control signal to the appropriate input pin(s) as per the application requirement. The input voltage should not exceed VDD.

3. Load Connection: Connect the load to the output pin ensuring that the maximum output current does not exceed 200mA.

4. Thermal Considerations: Ensure adequate thermal management if operating at high currents or temperatures. Refer to the thermal impedance data in the datasheet for detailed guidelines.

5. Shutdown Mode: To enter shutdown mode, apply a low logic level to the shutdown pin. This reduces the current consumption to approximately 0.1渭A.

6. Reverse Current Protection: The device inherently limits reverse current to 1渭A, protecting against backflow from the output to the input.

7. PCB Layout Recommendations: Follow recommended PCB layout practices including proper grounding and minimizing trace lengths for high-frequency signals to ensure optimal performance.

Note: For detailed specifications and additional information, refer to the official MAX14753EUE+ datasheet provided by Maxim Integrated.

(For reference only)