Details

---

BUY MAX6063AEUR-T https://www.utsource.net/itm/p/6284785.html
Precision, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Operating Range	2.7	-	5.5	V
Output Voltage	VOUT	Fixed Output	-	1.8	-	V
Quiescent Current	IQ	Operating	-	1.0	-	μA
Shutdown Current	ISD	VSHDN = 0V	-	0.01	-	μA
Load Regulation	ΔVOUT	ILOAD = 1mA to 150mA	-	0.1	-	%
Line Regulation	ΔVOUT	VIN = 2.7V to 5.5V	-	0.1	-	%
Dropout Voltage	VDROPOUT	ILOAD = 150mA	-	0.3	-	V
PSRR (Power Supply Rejection Ratio)	PSRR	f = 1kHz, ILOAD = 1mA	-	70	-	dB

Instructions for MAX6063AEUR-T:

1. Input Voltage (VIN):

   • Ensure the input voltage is within the operating range of 2.7V to 5.5V.

2. Output Voltage (VOUT):

   • The device provides a fixed output voltage of 1.8V.

3. Quiescent Current (IQ):

   • During normal operation, the quiescent current is typically 1.0μA.

4. Shutdown Mode:

   • Apply 0V to the shutdown pin (VSHDN) to enter low-power shutdown mode, reducing current consumption to approximately 0.01μA.

5. Load and Line Regulation:

   • The load regulation and line regulation are both specified as 0.1%, ensuring stable output under varying load and input conditions.

6. Dropout Voltage:

   • The dropout voltage is typically 0.3V at a load current of 150mA, allowing efficient operation even with low headroom between VIN and VOUT.

7. Power Supply Rejection Ratio (PSRR):

   • At 1kHz and a load current of 1mA, the PSRR is 70dB, providing good noise rejection from the input supply.

8. Installation:

   • Ensure proper decoupling capacitors are placed close to the input and output pins to maintain stability and performance.

9. Operating Temperature:

   • Check the datasheet for the specific temperature range in which the device is rated to operate reliably.

For detailed specifications and application notes, refer to the official Maxim Integrated datasheet for the MAX6063AEUR-T.

(For reference only)