Details

---

BUY 74VHC14SJX https://www.utsource.net/itm/p/6349058.html
Hex Schmitt Inverter

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC		2.0		5.5	V
Input Low Voltage	VI(L)	IIL = 1.0 mA			0.8	V
Input High Voltage	VI(H)	IIH = -20 渭A	2.0			V
Output Low Voltage	VO(L)	IO = 4 mA			0.24	V
Output High Voltage	VO(H)	IO = -4 mA			5.0	V
Propagation Delay	tpLH	VCC = 5V, TA = 25掳C		7		ns
Propagation Delay	tpHL	VCC = 5V, TA = 25掳C		7		ns
Power Dissipation	PD	Per Package			150	mW

Instructions for Use:

1. Supply Voltage: Ensure the supply voltage (VCC) is within the specified range of 2.0V to 5.5V.
2. Input Levels: The device recognizes input voltages below 0.8V as low and above 2.0V as high. Inputs should not exceed VCC or go below GND.
3. Output Levels: Outputs will be driven low to a maximum of 0.24V when sourcing up to 4mA, and high to a minimum of 5.0V when sinking up to 4mA.
4. Propagation Delay: Typical propagation delays are 7ns at room temperature and a 5V supply voltage.
5. Power Dissipation: Ensure that the power dissipation does not exceed 150mW per package to avoid overheating.
6. Handling: This device is sensitive to electrostatic discharge (ESD); use appropriate precautions during handling and installation.

Note: Always refer to the specific datasheet provided by the manufacturer for detailed specifications and application notes.

(For reference only)