Details

---

BUY ACPL-W61L-560E https://www.utsource.net/itm/p/6360722.html
Ultra Low Power 10 MBd Digital CMOS Optocouplers

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Forward Voltage	VF	IF = 20 mA	1.0	1.3	1.6	V
Input Reverse Voltage	VR				5	V
Output Collector-Emitter Saturation Voltage	VCE(sat)	IC = 15 mA, IF = 20 mA	0.2	0.4	0.6	V
Output Collector Leakage Current	ICEO	VCE = 30 V			100	nA
Isolation Voltage	VIORM				5600	Vrms
Propagation Delay Time	tPD	IF = 20 mA, RL = 100 惟	2	4	6	渭s
Rise Time	tr	IF = 20 mA, RL = 100 惟	0.8	1.5	2.2	渭s
Fall Time	tf	IF = 20 mA, RL = 100 惟	0.8	1.5	2.2	渭s

Instructions for Use:

1. Power Supply and Connections:

   • Ensure the input voltage (VIN) is within the specified range to avoid damaging the device.
   • Connect the output side of the optocoupler to the load with appropriate current limiting resistors if necessary.

2. Handling Precautions:

   • Handle the ACPL-W61L-560E with care to prevent static damage; use ESD protection measures.
   • Avoid exceeding the maximum ratings listed in the table to ensure reliable operation.

3. Mounting and Layout Considerations:

   • Place the component in areas where it can dissipate heat effectively if operating at higher currents.
   • Maintain isolation between the input and output circuits to preserve the integrity of the electrical isolation provided by the optocoupler.

4. Testing:

   • When testing or measuring parameters, ensure that all conditions specified in the parameter table are met to achieve accurate results.
   • Use a suitable test setup to measure propagation delay, rise time, and fall time accurately.

5. Storage:

   • Store in a dry, cool place away from direct sunlight and sources of electromagnetic interference.

For detailed application notes and further technical support, refer to the manufacturer's documentation or contact their customer service.

(For reference only)