Details

---

BUY FF300R12MS4 https://www.utsource.net/itm/p/6374074.html
EconoDUAL3 module with fast IGBT2 for high switching frequency

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Rated Voltage	VDSS	-	1200	-	V
Rated Current	ID	-	300	-	A	Tc = 25掳C
On-State Resistance	RDS(on)	-	4.6	-	m惟	VGS = 15V, ID = 300A
Gate Charge	Qg	-	280	-	nC	VGS = 15V
Input Capacitance	Ciss	-	9700	-	pF	VDS = 1200V, VGS = 0V
Output Capacitance	Coss	-	1400	-	pF	VDS = 1200V, VGS = 0V
Reverse Transfer Capacitance	Crss	-	2600	-	pF	VDS = 1200V, VGS = 0V
Junction Temperature	TJ	-	-	150	掳C

Instructions for FF300R12MS4

1. Installation and Handling:

   • Ensure that the device is handled with care to avoid damage to the terminals.
   • Use appropriate anti-static precautions during handling.

2. Mounting:

   • Mount the device on a suitable heatsink to ensure proper heat dissipation.
   • Ensure good thermal contact between the device and the heatsink.

3. Operating Conditions:

   • Do not exceed the maximum ratings specified in the table.
   • Operate within the recommended operating conditions to ensure reliable performance.

4. Driving the Gate:

   • Apply a gate-source voltage (VGS) of at least 15V to fully turn on the MOSFET.
   • Ensure the gate drive circuitry can supply the required gate charge (Qg).

5. Storage:

   • Store in a dry environment away from direct sunlight and sources of heat.

6. Testing:

   • Perform initial testing under controlled conditions to verify correct operation.
   • Monitor temperature and current levels during testing to prevent overheating or overcurrent situations.

7. Safety Precautions:

   • Always disconnect power before making any changes to the circuit.
   • Use protective equipment when working with high voltages.

8. Troubleshooting:

   • If the device fails to operate correctly, check connections, power supply, and control signals.
   • Verify that the device has not been subjected to excessive voltage or current.

(For reference only)