Details

---

BUY TLP281BL https://www.utsource.net/itm/p/6375714.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	VF	IF = 10 mA	1.0	1.2	1.4	V
Peak Forward Current	IFM	Tj = 25°C	-	-	30	mA
Continuous Forward Current	IF	Tj = 75°C, Pulse Width ≤ 1 s	-	-	10	mA
Reverse Voltage	VR		-	-	5	V
Output Collector-Emitter Saturation Voltage	VCE(sat)	IC = 5 mA, IF = 5 mA	0.2	0.3	0.4	V
Output Collector Leakage Current	ICEO	VCE = 5 V, Tj = 25°C	-	10	100	nA
Isolation Voltage	BVS	Test Condition: 1 minute	-	-	2500	Vrms
Operating Temperature	Topr		-40	-	85	°C
Storage Temperature	Tstg		-40	-	100	°C

Instructions for Use:

1. Mounting and Handling:

   • Handle the TLP281BL with care to avoid damage.
   • Ensure proper mounting on a PCB to maintain electrical isolation and thermal performance.

2. Electrical Connections:

   • Connect the forward current (IF) within the specified limits to prevent overheating or damage.
   • Ensure reverse voltage (VR) does not exceed the maximum rating to avoid breakdown.

3. Thermal Management:

   • Operate within the recommended temperature range to ensure reliable performance.
   • Consider heat dissipation if operating near the upper temperature limit.

4. Testing:

   • When testing the device, do not exceed the peak forward current (IFM) or isolation voltage (BVS) ratings.
   • For accurate leakage current measurements, ensure test conditions match those specified in the datasheet.

5. Storage:

   • Store the device in a dry, cool place within the storage temperature range to prevent degradation.

6. Safety:

   • Always follow safety guidelines when handling electronic components.
   • Ensure proper grounding and use appropriate protective equipment.

(For reference only)