Details

---

BUY ADL5902ACPZ https://www.utsource.net/itm/p/6380199.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7		5.5	V	Operating supply voltage range
Supply Current	IDD		16		mA	Typical supply current at nominal operation
Input Voltage Range	VIN	-0.3		2.8	V	Input common-mode voltage range
Output Voltage Range	VOUT	0		1.8	V	Output voltage range
Temperature Coefficient	TC		±100		ppm/°C	Temperature coefficient of the output voltage
Power Bandwidth	BW		10		MHz	Typical power bandwidth
Response Time	τ		20		μs	Typical response time to a step change in input
Isolation	ISO		80		dB	RF input-to-output isolation

Instructions for ADL5902ACPZ

1. Power Supply Connection:

   • Connect the supply voltage (VDD) between 2.7V and 5.5V to the appropriate pin.
   • Ensure a stable power supply to avoid fluctuations that can affect performance.

2. Input Signal:

   • Apply the input signal within the common-mode voltage range (-0.3V to 2.8V).
   • Ensure the input signal is within the device's specified limits to prevent damage.

3. Output Configuration:

   • The output voltage will range from 0V to 1.8V, suitable for interfacing with other analog circuits or ADCs.
   • Use appropriate load resistors if necessary to match impedance requirements.

4. Temperature Considerations:

   • Be aware of the temperature coefficient (±100 ppm/°C) which affects the output voltage stability over temperature changes.

5. Performance Optimization:

   • For optimal performance, operate within the specified power bandwidth (up to 10 MHz).
   • Allow for a typical response time of 20 μs when expecting changes in the input signal.

6. Isolation:

   • The device provides up to 80 dB of isolation between the RF input and output, ensuring minimal interference.

Note: Always refer to the official datasheet provided by Analog Devices for detailed specifications and application notes.

(For reference only)