Details

---

BUY SUD50P06-15L-E3 https://www.utsource.net/itm/p/6381846.html
MOSFET P-CH D-S 60V TO252

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN		2.7		5.5	V
Output Voltage	VOUT		0.8		3.3	V
Output Current	IOUT	Continuous		1.5		A
Efficiency	畏	VIN=5V, IOUT=1A		90		%
Switching Frequency	fSW			1.5		MHz
Quiescent Current	IQ	VIN=5V		60		渭A
Dropout Voltage	VDROPOUT	IOUT=1.5A		400		mV
Operating Temperature	TOPR		-40		125	掳C

Instructions for SUD50P06-15L-E3

1. Power Supply Connection:

   • Ensure the input voltage (VIN) is within the specified range of 2.7V to 5.5V.
   • Connect the output voltage (VOUT) to your load, ensuring it does not exceed the maximum output current capability.

2. Output Configuration:

   • Set the desired output voltage using external resistors if adjustable. Refer to the datasheet for specific resistor values.

3. Thermal Considerations:

   • The device can operate from -40掳C to +125掳C. For high-power applications, ensure adequate heat sinking or cooling methods are in place to maintain safe operating temperatures.

4. Efficiency Monitoring:

   • Monitor the efficiency under typical operating conditions to ensure optimal performance. Adjust the load and input voltage as necessary to stay within the recommended efficiency range.

5. Switching Frequency:

   • The switching frequency is set at 1.5MHz. This setting helps minimize the size of external components while maintaining high efficiency.

6. Quiescent Current:

   • Keep an eye on quiescent current, which should be around 60渭A at 5V input to minimize power loss in low-load conditions.

7. Dropout Voltage:

   • Be aware of the dropout voltage when designing circuits that require a very low voltage difference between input and output.

8. Safety Precautions:

   • Always follow standard safety precautions when handling electronic components. Ensure proper grounding and avoid short circuits.

For detailed design considerations and more specific instructions, refer to the manufacturer's datasheet for the SUD50P06-15L-E3.

(For reference only)