Details

---

BUY TL594INS https://www.utsource.net/itm/p/6385936.html

Parameter	Description	Value	Unit
Supply Voltage (Vcc)	Operating voltage range	5.0 to 40	V
Output Current	Maximum output current	100	mA
Frequency Range	Adjustable frequency range	0.1 Hz to 300 kHz	Hz
Duty Cycle	Adjustable duty cycle range	0 to 100	%
Power Dissipation	Maximum power dissipation	625	mW
Operating Temperature	Temperature range for operation	-40 to +85	°C
Storage Temperature	Temperature range for storage	-65 to +150	°C

Instructions for TL594INS

1. Power Supply Connection:

   • Connect the positive terminal of the supply voltage (Vcc) to pin 8.
   • Connect the ground (GND) to pin 4.

2. Frequency Adjustment:

   • Adjust the frequency using an external resistor and capacitor connected between pins 6 and 7.
   • Refer to the formula in the datasheet for specific frequency settings.

3. Duty Cycle Control:

   • Modify the duty cycle by adjusting the resistance connected between pins 5 and 6.
   • A lower resistance results in a higher duty cycle.

4. Output Configuration:

   • The output can be configured as either push-pull or open-collector depending on the application requirements.
   • For push-pull configuration, connect the load directly to the output pin.
   • For open-collector configuration, connect an external pull-up resistor to the output pin.

5. Thermal Considerations:

   • Ensure adequate heat dissipation if operating near maximum power dissipation levels.
   • Use heatsinks or other cooling methods if necessary.

6. Handling Precautions:

   • Handle with care to avoid damage from electrostatic discharge (ESD).
   • Store in recommended temperature conditions to maintain reliability.

Note: Always refer to the manufacturer's datasheet for detailed specifications and application notes.

(For reference only)