Details

---

BUY N74F863N https://www.utsource.net/itm/p/6387253.html
Bus transceivers 3-State

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	4.5	5	5.5	V
Input Low Voltage	VIL		0		1.5	V
Input High Voltage	VIH		3.5		5.5	V
Output Low Voltage	VOL	IO = 16mA	0		0.4	V
Output High Voltage	VOH	IO = -4mA	2.4		5.5	V
Propagation Delay Time	tpd	VCC = 5V, Tamb = 25°C		9		ns
Power Dissipation	PD	Per Package			750	mW

Instructions for N74F863N

1. Power Supply Requirements:

   • Ensure the supply voltage (VCC) is within the range of 4.5V to 5.5V to avoid damage or improper operation.

2. Input Signal Levels:

   • Recognize that input signals are considered low when below 1.5V and high when above 3.5V.

3. Output Signal Levels:

   • When sourcing current up to 16mA, the output can go as low as 0.4V.
   • When sinking current up to -4mA, the output can reach up to 5.5V.

4. Propagation Delay:

   • The typical propagation delay time at room temperature and nominal supply voltage is 9ns.

5. Thermal Considerations:

   • Monitor power dissipation to ensure it does not exceed 750mW to prevent overheating.

6. Handling Precautions:

   • Follow standard ESD handling procedures to prevent damage to the device.

7. Mounting Orientation:

   • Mount the component according to the manufacturer's guidelines to ensure proper heat dissipation and mechanical stability.

8. Storage Conditions:

   • Store in a dry environment away from direct sunlight and extreme temperatures to maintain reliability.

Note: Always refer to the specific datasheet provided by the manufacturer for detailed specifications and additional information.

(For reference only)