Details

---

BUY CC1120RHBR https://www.utsource.net/itm/p/6459070.html

Parameter	Description	Units
Supply Voltage (VDD)	Operating supply voltage range	V
Supply Current	Typical supply current in active mode	mA
Output Power	Maximum output power	dBm
Sensitivity	Receiver sensitivity at a given data rate and modulation scheme	dBm
Frequency Range	Operational frequency range	MHz
Data Rate	Supported data rates	kbps
Modulation Schemes	Supported modulation schemes (e.g., 2-FSK, 4-FSK, MSK, GFSK)	-
Package Type	Type of package	-
Operating Temperature	Temperature range for operation	掳C

Instructions for CC1120RHBR:

1. Powering the Device:

   • Ensure the supply voltage (VDD) is within the specified operating range.
   • Connect the power supply to the designated pins as per the datasheet.

2. Setting Up Communication Parameters:

   • Configure the communication parameters such as frequency, data rate, and modulation scheme using the SPI interface.
   • Use the provided registers to set these parameters accurately.

3. Transmit Mode:

   • To transmit data, load the data into the transmit FIFO.
   • Trigger the transmission by setting the appropriate command via the SPI interface.

4. Receive Mode:

   • Configure the receiver settings including gain control and filtering.
   • Read received data from the receive FIFO once a valid packet is detected.

5. Handling Interrupts:

   • Monitor interrupt lines for events like packet reception or transmission completion.
   • Service interrupts promptly to ensure reliable operation.

6. Temperature Considerations:

   • Operate the device within the specified temperature range to avoid damage or performance degradation.
   • Implement thermal management strategies if operating near the upper limit of the temperature range.

7. Storage and Handling:

   • Store the device in an ESD-safe environment when not in use.
   • Handle with care to prevent physical damage to the package.

For detailed register configurations and advanced settings, refer to the official datasheet and application notes provided by Texas Instruments.

(For reference only)