Details

---

BUY LF13006N https://www.utsource.net/itm/p/6524779.html
N/A

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating Range	4.5	-	20	V
Input Offset Voltage	Vio	-	-	2	6	mV
Input Bias Current	Iib	-	-	10	50	nA
Slew Rate	SR	-	-	0.3	1	V/μs
Bandwidth	GBW	Unity Gain	-	1.2	3	MHz
Output Current	Iout	Short Circuit	-	15	25	mA
Quiescent Current	IQ	No Load	-	2	4	mA

Instructions for LF13006N

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 4.5V to 20V to avoid damage or improper operation.

2. Input Configuration:

   • Keep input voltages within the common-mode range to prevent distortion and ensure accurate signal processing.
   • Use proper bypass capacitors on the power supply lines to minimize noise and ripple.

3. Output Load:

   • Do not exceed the maximum output current rating to protect the device from overheating or failure.
   • Ensure the load impedance is compatible with the output drive capability of the LF13006N.

4. Thermal Considerations:

   • Provide adequate heat sinking if operating at high supply voltages or under heavy loads to maintain device reliability.

5. Installation:

   • Follow standard precautions for handling electrostatic sensitive devices (ESD).
   • Ensure correct pin orientation during installation to prevent damage to the device.

6. Application Notes:

   • Refer to the manufacturer’s application notes for specific circuit configurations and advanced usage tips.

(For reference only)