Details

---

BUY MPC8260ACZUMIBB https://www.utsource.net/itm/p/6525397.html
N/A

Parameter	Description	Value
Part Number	Full part number designation	MPC8260ACZUMIBB
Package Type	Type of package	ZU (Multi-Chip Module)
Processor Core	Central processing unit	PowerPC 603e
Clock Speed	Operating frequency of the processor	Up to 200 MHz
Bus Interface	Type of bus interface supported	PCI, SDRAM
Memory Interface	Supported memory types	SDRAM, SRAM
Temperature Range	Operating temperature range	-40°C to +85°C
I/O Voltage	Input/output voltage	3.3V
Core Voltage	Voltage supplied to the processor core	2.5V
Power Consumption	Typical power consumption	2.5W (typical)
Peripheral Interfaces	Types of peripheral interfaces supported	UART, IIC, SPI, Timers, GPIO
Package Pins	Number of pins on the package	417

Instructions for Use:

1. Power Supply Requirements:

   • Ensure that the core voltage is set to 2.5V and the I/O voltage is set to 3.3V.
   • Use appropriate decoupling capacitors near the power supply pins to reduce noise.

2. Clock Configuration:

   • Connect an external crystal or oscillator to provide the required clock frequency up to 200 MHz.
   • Configure the PLL settings in software if a higher internal clock rate is needed.

3. Memory Initialization:

   • Initialize the SDRAM controller during startup using the initialization routines provided in the software development kit.
   • Ensure that the memory timing parameters are correctly configured for stable operation.

4. Peripheral Setup:

   • Configure the UART, IIC, SPI, and other peripherals as needed through the device's register settings.
   • Refer to the device data sheet for specific configuration details and timing requirements.

5. Operating Environment:

   • Operate the device within the specified temperature range (-40°C to +85°C).
   • Ensure adequate cooling if operating at high frequencies or under heavy load conditions.

6. Software Development:

   • Utilize the provided SDK and development tools for writing and debugging applications.
   • Follow best practices for embedded software development to ensure reliable operation.

For detailed specifications and further information, refer to the official MPC8260 datasheet and application notes.

(For reference only)