Details

---

BUY AD581KH https://www.utsource.net/itm/p/6525491.html
N/A

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Output Voltage	VOUT	IOUT = 10 mA		10		V
Line Regulation		VIN change, IOUT = 10 mA		0.01		mV/V
Load Regulation		IOUT from 0 to 10 mA		0.02		mV/mA
Temperature Coefficient		Over operating temperature range		5		ppm/°C
Dropout Voltage	VDROPOUT	IOUT = 10 mA		1.5		V
Supply Current	ISUPPLY	IOUT = 0 mA		3		mA
Output Resistance	ROUTPUT	f = 1 kHz		0.5		Ω
Operating Temperature Range			-40		85	°C

Instructions for Use:

1. Power Supply: Ensure the input voltage is within the specified range and stable to avoid damage or erratic behavior.
2. Output Configuration: Connect a load that does not exceed the maximum output current of 10 mA to maintain stability and accuracy.
3. Thermal Management: Operate within the specified temperature range (-40°C to +85°C) to ensure reliable performance. For applications outside this range, consult additional thermal management techniques.
4. Bypass Capacitors: It is recommended to place bypass capacitors close to the power supply pins to minimize noise and improve transient response.
5. Load Regulation: Keep load changes minimal to maintain output voltage stability as the device has a typical load regulation of 0.02 mV/mA.
6. Line Regulation: To achieve optimal line regulation (0.01 mV/V), ensure the input voltage changes are gradual and within limits.
7. Temperature Coefficient: The device has a temperature coefficient of 5 ppm/°C, which means temperature changes will slightly affect the output voltage. Compensate or calibrate as necessary for precision applications.
8. Dropout Voltage: Be aware of the dropout voltage (1.5 V at 10 mA) when designing circuits to prevent entering dropout mode where regulation fails.

Note: Specific values and conditions can vary depending on the exact model and manufacturer specifications. Always refer to the official datasheet for the most accurate information.

(For reference only)