Details

---

BUY PGA102KP https://www.utsource.net/itm/p/6525611.html
N/A

Parameter	Description	Value
Part Number	Programmable Gain Amplifier	PGA102KP
Supply Voltage	Operating voltage range	2.7V to 5.5V
Input Voltage	Range of input signal	卤(VDD - 1.5V)
Gain Range	Adjustable gain	1V/V to 1000V/V
Bandwidth	Frequency response	1MHz (G=1), 1kHz (G=1000)
Input Offset	Voltage offset at the input	卤2mV
Quiescent Current	Current consumption in active state	300渭A
Package Type	Physical package type	SOIC-8
Operating Temp.	Temperature range for operation	-40掳C to +85掳C

Instructions for Use:

1. Power Supply: Ensure the supply voltage is within the specified range (2.7V to 5.5V). Connect VDD and GND to the appropriate power supply rails.
2. Input Signal: Apply the input signal within the input voltage range. Avoid exceeding 卤(VDD - 1.5V) to prevent damage or incorrect operation.
3. Gain Setting: Adjust the gain using external resistors or through digital control if supported. The gain can be set from 1V/V up to 1000V/V.
4. Frequency Response: Be aware that the bandwidth decreases with higher gains. For example, at a gain of 1, the bandwidth is approximately 1MHz, while at a gain of 1000, it drops to about 1kHz.
5. Offset Management: Account for an input offset voltage of up to 卤2mV when designing your circuit.
6. Current Consumption: Note the quiescent current of 300渭A to manage power budget effectively.
7. Installation: Mount the PGA102KP on a PCB ensuring proper orientation as per the SOIC-8 package guidelines.
8. Operating Environment: Operate the device within the temperature range of -40掳C to +85掳C for reliable performance.

For detailed specifications and advanced configurations, refer to the manufacturer's datasheet.

(For reference only)