Details

---

BUY SC14210P https://www.utsource.net/itm/p/6525724.html
N/A

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	2.7	-	5.5	V	Operating input voltage range
Output Voltage	VOUT	-	3.3	-	V	Fixed output voltage
Output Current	IOUT	-	600	-	mA	Continuous output current
Quiescent Current	IQ	-	2.5	-	μA	Typical quiescent current
Dropout Voltage	VDROPOUT	-	180	-	mV	Typical dropout voltage at full load
Load Regulation	-	-	0.5	-	%	Load regulation from 0 to 600mA
Line Regulation	-	-	0.1	-	%/V	Line regulation over the input range
PSRR (Power Supply Rejection Ratio)	-	-	70	-	dB @ 1kHz	Power supply rejection ratio
Operating Temperature	TOPR	-40	-	85	°C	Operating temperature range

Instructions for SC14210P:

1. Input Connection: Connect the input pin (VIN) to a power source within the specified voltage range (2.7V to 5.5V).
2. Output Connection: The output pin (VOUT) provides a fixed 3.3V output. Connect this pin to the load requiring regulated power.
3. Ground Connection: Ensure that the ground (GND) pin is connected to the common ground of both the input and output circuits.
4. Capacitors: It is recommended to place a 1μF ceramic capacitor between VIN and GND close to the device to ensure stability. An additional 1μF capacitor between VOUT and GND can improve transient response.
5. Thermal Considerations: The device is designed to operate efficiently, but for applications where the device may dissipate significant power, ensure adequate heat sinking or PCB copper area to handle thermal dissipation.
6. Protection Features: The SC14210P includes internal protection features such as over-temperature shutdown and current limiting to protect against fault conditions.

(For reference only)