Details

---

BUY ADXL213AE https://www.utsource.net/itm/p/6525816.html
N/A

Parameter	Symbol	Min	Typical	Max	Units
Supply Voltage	VDD	2.7		5.25	V
Operating Temperature	TA	-40		85	°C
Output Sensitivity		350			mV/g
Zero-g Output Level		1.6		3.4	V
Bandwidth			1.7		kHz
Current Consumption	IDD		1.4		mA

Instructions for Use

1. Power Supply:

   • Ensure the supply voltage is within the range of 2.7V to 5.25V.
   • Connect the VDD pin to the power supply and GND pin to ground.

2. Output Configuration:

   • The ADXL213AE provides analog output proportional to acceleration.
   • Connect the XOUT, YOUT pins to your signal processing or ADC input as required.

3. Calibration:

   • For accurate readings, calibrate the zero-g output level which typically ranges from 1.6V to 3.4V.
   • Adjust sensitivity if necessary; it is around 350mV/g.

4. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to +85°C for optimal performance.

5. Handling Precautions:

   • Avoid exposing the sensor to excessive mechanical shock or vibration.
   • Handle with care to prevent damage to sensitive components.

6. Mounting:

   • Mount the package on a stable surface to ensure reliable measurements.
   • Orientation affects the axis of measurement, so align according to application needs.

7. Testing:

   • Test the setup in a controlled environment before deploying in actual conditions.
   • Verify bandwidth and response time meet application requirements.

(For reference only)