Details

---

BUY CAT28F010G-90 https://www.utsource.net/itm/p/6526281.html
N/A

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	2.7		3.6	V
Standby Current	Icc	Vcc = 3.0V		1		渭A
Active Current	Icc	Reading		5		mA
Programming Current	Ipp	Programming		25		mA
Erase Current	Ice	Block Erase		10		mA
Access Time	tacc			90		ns
Page Program Time	tpp			200		渭s
Block Erase Time	teb			4		ms
Data Retention				10		Years

Instructions for CAT28F010G-90

1. Power Supply Requirements:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 3.6V for reliable operation.

2. Current Consumption:

   • The device consumes minimal current in standby mode, typically around 1渭A at 3.0V.
   • During active operations such as reading, it draws about 5mA.
   • For programming and block erase operations, currents can go up to 25mA and 10mA respectively.

3. Timing Parameters:

   • The access time for read operations is typically 90ns.
   • Page programming takes approximately 200渭s.
   • Block erase operations require about 4ms.

4. Data Retention:

   • The device retains data for up to 10 years under specified operating conditions.

5. Handling and Storage:

   • Follow proper ESD handling procedures to prevent damage.
   • Store in recommended environmental conditions to ensure longevity and performance.

6. Programming and Erasing:

   • Use appropriate commands and protocols for programming and erasing memory blocks as per the datasheet specifications.

7. Operating Temperature:

   • Verify that the device operates within its specified temperature range to avoid malfunction or damage.

(For reference only)