Details

---

BUY HD64180RCP8X https://www.utsource.net/itm/p/6526554.html
N/A

Parameter	Description	Value
Product Name	Microcontroller Unit (MCU)	HD64180RCP8X
Package Type	Package Type	QFP-100
Operating Voltage	Supply Voltage Range	5.0V
Operating Temperature	Temperature Range	-20掳C to +85掳C
CPU Core	Central Processing Unit	Z80 Compatible
Clock Frequency	Maximum Clock Frequency	18 MHz
Flash Memory	On-chip Flash Memory Size	32KB
RAM	On-chip RAM Size	2KB
I/O Pins	Number of I/O Pins	64
Timers	Number of Timers	3
Communication Interfaces	Supported Communication Protocols	UART, SPI, I2C
Interrupts	Number of Interrupt Sources	16
Power Consumption	Typical Power Consumption at Max Frequency	150 mW
Analog Inputs	Number of Analog-to-Digital Converter Channels	8
ADC Resolution	Analog-to-Digital Converter Resolution	10-bit

Instructions for Use

1. Power Supply Connection:

   • Connect the VCC pin to a stable 5V power supply and GND to ground.
   • Ensure that bypass capacitors are placed close to the VCC and GND pins to stabilize the power supply.

2. Clock Configuration:

   • Connect an external crystal or oscillator to the XTAL1 and XTAL2 pins if using an external clock source.
   • Configure the internal oscillator settings via software if using the internal clock.

3. Programming:

   • Use an appropriate programmer compatible with the HD64180RCP8X to upload code.
   • Ensure the programming interface (ISP or ICSP) is correctly connected.

4. Pin Configuration:

   • Configure the I/O pins as inputs or outputs in your initialization code.
   • Refer to the datasheet for specific pin functions and configurations.

5. Communication Setup:

   • Initialize the communication interfaces (UART, SPI, I2C) according to the application requirements.
   • Set up baud rates, data formats, and other parameters as needed.

6. Interrupt Handling:

   • Enable interrupts globally and configure individual interrupt sources as required.
   • Write interrupt service routines (ISRs) to handle interrupt events.

7. Analog Input Usage:

   • Connect analog signals to the ADC input pins.
   • Configure the ADC channels and start conversions as needed in your application.

8. Testing and Debugging:

   • Test the MCU functionality with simple programs before moving to complex applications.
   • Use debugging tools such as in-circuit debuggers or emulators to troubleshoot issues.

9. Final Assembly:

   • Place the HD64180RCP8X on the PCB ensuring proper alignment and soldering.
   • Perform final testing under actual operating conditions to ensure reliability.

For detailed specifications and advanced configurations, refer to the official HD64180RCP8X datasheet provided by the manufacturer.

(For reference only)