Details

---

BUY SKFL150/09DS https://www.utsource.net/itm/p/6526719.html

Parameter	Description
Part Number	SKFL150/09DS
Type	Schottky Rectifier
Package	DO-204AD (SOD-323)
Maximum Reverse Voltage (VRM)	90V
Maximum Average Forward Current (IF(AV))	1.5A at Tc = 75掳C, 1.0A at Tc = 100掳C
Peak Forward Surge Current (IFSM)	8.0A (8.3ms single half sine-wave)
Forward Voltage Drop (VF)	0.55V @ IF = 1.0A, 25掳C
Reverse Recovery Time (trr)	60ns
Junction Temperature Range (TJ)	-55掳C to +150掳C
Storage Temperature Range (TS)	-55掳C to +150掳C
Mounting Type	Surface Mount / Through Hole

Instructions for Use:

1. Handling Precautions:

   • Handle with care to avoid damage to the leads and body.
   • Avoid exposing the component to excessive heat or moisture.

2. Mounting:

   • Ensure that the mounting surface is clean and free from contaminants.
   • For through-hole mounting, ensure the holes are properly drilled to match the lead diameter.
   • For surface mount, apply appropriate solder paste and reflow according to industry standards.

3. Soldering:

   • Preheat the PCB to reduce thermal shock.
   • Use a soldering temperature not exceeding 260掳C for no more than 10 seconds per joint.
   • Allow adequate cooling time post-soldering.

4. Electrical Connections:

   • Connect the rectifier in the circuit as per the polarity indicated on the component.
   • Ensure connections are secure and insulated where necessary to prevent short circuits.

5. Thermal Management:

   • If operating near the maximum current or voltage ratings, consider additional cooling methods such as heatsinks or forced air cooling.

6. Testing:

   • After installation, test the circuit under controlled conditions to ensure proper operation of the rectifier.
   • Monitor temperature and performance parameters during testing.

(For reference only)