Details

---

BUY MIG25Q806H https://www.utsource.net/itm/p/6526831.html
HIGH POWER SWITCHING APPLICATIONS MOTOR CONTROL APPLICATIONS

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.7	-	3.6	V
Standby Current	ISB	VCC = 3.0V	-	1	5	渭A
Active Current	IOP	VCC = 3.0V, fCLK = 50 MHz	-	15	25	mA
Output High Level Voltage	VOH	IO = -0.4mA	2.4	-	VCC-0.4	V
Output Low Level Voltage	VOL	IO = 1.6mA	0	-	0.4	V
Access Time	tACC	VCC = 3.0V, fCLK = 50 MHz	-	85	-	ns
Data Retention			>10	-	-	Years
Package Type			-	-	-	WSON8

Instructions for MIG25Q806H

1. Power Supply Setup:

   • Ensure the supply voltage (VCC) is within the specified range of 2.7V to 3.6V.
   • Use appropriate decoupling capacitors close to the power pins to stabilize the supply voltage.

2. Clock Configuration:

   • The device supports a maximum clock frequency (fCLK) of 50 MHz. Ensure that the system clock meets this requirement for optimal performance.

3. Operation Modes:

   • The device can operate in different modes such as read, write, and erase. Refer to the specific command set for each operation.
   • For read operations, use the READ command and ensure the address lines are correctly configured.
   • For write operations, first issue the WRITE ENABLE command before performing any data write or status register write commands.

4. Standby Mode:

   • To minimize power consumption, enter standby mode when the device is not actively being used. This can be achieved by ensuring no active clock cycles are provided to the device.

5. Handling Precautions:

   • Handle the device with care to avoid electrostatic discharge (ESD). Use proper ESD protection equipment.
   • Ensure the operating temperature range is maintained between -40掳C and +85掳C for reliable performance.

6. Package Handling:

   • The MIG25Q806H comes in a WSON8 package. Follow standard surface mount technology (SMT) guidelines for soldering and handling.

7. Data Integrity:

   • Ensure data integrity by following the timing parameters strictly, especially access time (tACC).
   • Regularly check the data retention specifications to ensure long-term reliability.

For detailed command sets and advanced configurations, refer to the datasheet provided by the manufacturer.

(For reference only)