Details

---

BUY MBR30050CT https://www.utsource.net/itm/p/6527007.html
300 Amp Rectifier 20 to 100 Volts Schottky Barrier

Parameter	Symbol	Min	Typical	Max	Unit
Average Rectified Current	IF(AV)	-	3.0	-	A
Peak Forward Surge Current	IFSM	-	120	-	A
Maximum DC Blocking Voltage	VRRM	-	50	-	V
Maximum Repetitive Peak Reverse Voltage	VRRM	-	50	-	V
Forward Voltage at Rated Current	VF @ IF=3.0A	-	0.8	-	V
Junction Temperature Range	TJ	-40	-	150	掳C
Storage Temperature Range	TSTG	-55	-	150	掳C

Instructions for MBR30050CT:

1. Handling and Storage:

   • Store the device in a dry, cool place to avoid moisture damage.
   • Handle with care to prevent mechanical damage.

2. Installation:

   • Ensure that the maximum junction temperature (TJ) does not exceed 150掳C during operation.
   • Mount the device on a heatsink if necessary to maintain operating temperatures within specified limits.

3. Electrical Connections:

   • Connect the device according to the circuit diagram provided by your design specifications.
   • Ensure that the peak forward surge current (IFSM) does not exceed 120A to prevent damage.
   • Keep the average rectified current (IF(AV)) within 3.0A for continuous operation.

4. Voltage Considerations:

   • The maximum DC blocking voltage (VRRM) is 50V; ensure that the applied reverse voltage does not exceed this value.

5. Thermal Management:

   • Monitor the junction temperature closely, especially under high load conditions.
   • Use appropriate thermal management techniques such as heat sinks or cooling fans if required.

6. Surge Protection:

   • Protect the device from transient voltages and currents using suitable protective components like TVS diodes.

7. Compliance:

   • Ensure compliance with all relevant safety and regulatory standards for electronic components.

(For reference only)