Details

---

BUY 2RI60E-060 https://www.utsource.net/itm/p/6527107.html
POWER DIODE MODULE

Parameter	Value	Unit
Part Number	2RI60E-060
Type	Relay
Coil Voltage	60	VDC
Coil Power	1.5	W
Coil Resistance	2400	Ω
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	10A
Insulation Resistance	100	MΩ
Dielectric Strength	2000	Vrms
Operating Temperature	-40 to +85	°C
Storage Temperature	-40 to +85	°C

Instructions for Use:

1. Installation: Ensure the relay is mounted on a flat surface, adhering to the manufacturer’s guidelines for spacing and clearance.
2. Wiring: Connect the coil terminals to the appropriate control voltage source. Verify that the contact wires are correctly connected to the load and power supply.
3. Operation: Apply the rated coil voltage to activate the relay. The contacts will switch according to the relay's configuration (SPDT).
4. Maintenance: Periodically inspect the relay for signs of wear or damage. Ensure all connections remain secure.
5. Storage: Store in a dry environment within the specified temperature range to prevent degradation.
6. Safety: Always disconnect power before performing any maintenance or wiring changes.

(For reference only)