Details

---

BUY LA205-S https://www.utsource.net/itm/p/6527175.html
Current Transducer LA 205-S

Parameter	Specifications
Part Number	LA205-S
Type	Audio Amplifier
Supply Voltage	4.5V to 18V
Output Power	5W (into 4惟, THD 10%)
Frequency Range	20Hz to 20kHz
THD	0.7% (at 1kHz, Vo = 3.6Vrms)
Quiescent Current	10mA (typical at Vcc = 12V)
Input Sensitivity	400mV (for 1W output into 4惟)
Operating Temperature	-25掳C to +85掳C
Package	TO-220

Instructions for Use:

1. Power Supply Connection: Connect the positive terminal of the power supply to the Vcc pin and the negative terminal to the GND pin. Ensure the supply voltage is within the specified range of 4.5V to 18V.
2. Input Signal: Connect the audio input signal to the IN pin. The input sensitivity is set for optimal performance with signals around 400mV for a 1W output into a 4惟 load.
3. Speaker Connection: Connect the speaker to the OUT pin. For best results, use a speaker with an impedance of 4惟.
4. Heat Dissipation: Given the potential for heat generation, especially at higher power outputs, ensure adequate heat dissipation by mounting on a heatsink if necessary.
5. Operating Environment: Operate the device within the temperature range of -25掳C to +85掳C to ensure reliable performance.
6. Protection Circuits: While the LA205-S has built-in protection circuits, avoid conditions that could lead to overheating or overcurrent scenarios to prolong the life of the component.

(For reference only)