Details

---

BUY PM20CEE060 https://www.utsource.net/itm/p/6527745.html
TRANSISTOR | IGBT POWER MODULE | 3-PH BRIDGE | 600V VBRCES | 20A IC

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN			28	V	Maximum input voltage
Output Voltage	VOUT	6			V	Regulated output voltage
Output Current	IOUT		2	3	A	Continuous output current
Quiescent Current	IQ		10		渭A	Current consumption in standby mode
Dropout Voltage	VDROPOUT		0.4		V	Voltage difference between VIN and VOUT for regulation
Operating Temperature	TOPR	-40		85	掳C	Operating temperature range
Storage Temperature	TSTG	-65		150	掳C	Storage temperature range

Instructions:

1. Power Supply Connection:

   • Connect the input voltage (VIN) to a supply within the specified range.
   • Ensure the output voltage (VOUT) is connected to the load.

2. Heat Management:

   • For applications where the PM20CEE060 operates near its maximum output current, ensure adequate heat sinking or cooling to manage the junction temperature within operational limits.

3. Capacitor Selection:

   • Use input and output capacitors as recommended by the manufacturer to ensure stability and minimize ripple.
   • Typical values are 10 渭F for input and 10 渭F for output.

4. PCB Layout:

   • Place the device close to the power plane to reduce noise and improve transient response.
   • Keep the ground connection short and wide to reduce impedance.

5. Handling Precautions:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD).
   • Follow anti-static procedures during assembly and handling.

6. Storage:

   • Store the device in a dry environment within the specified storage temperature range to prevent damage.

7. Testing:

   • Before finalizing the design, test the circuit under all expected operating conditions to ensure reliable performance.

(For reference only)