Details

---

BUY VBO40-12N06 https://www.utsource.net/itm/p/6528142.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Breakdown Voltage	V(BR)DSS	-	600	-	V
Drain-source On-resistance	RDS(on)	-	1.2	-	惟	@ VGS = 10V, ID = 12A
Continuous Drain Current	ID	-	12	-	A	@ Tc = 25掳C
Gate Charge	Qg	-	84	-	nC
Input Capacitance	Ciss	-	3600	-	pF	@ VDS = 300V, VGS = 0V
Total Power Dissipation	Ptot	-	170	-	W	@ Tc = 25掳C

Instructions for Use:

1. Handling Precautions:

   • The VBO40-12N06 is sensitive to electrostatic discharge (ESD). Handle with care and use appropriate ESD protection.

2. Mounting:

   • Ensure proper heat sinking if operating near the maximum power dissipation limits.
   • Torque the mounting screws to the recommended specification to ensure good thermal contact.

3. Biasing:

   • For optimal performance, apply a gate-source voltage (VGS) of at least 10V to fully turn on the device.
   • Keep VGS within safe operating limits to avoid damaging the gate oxide.

4. Operating Temperature:

   • Operate within the specified temperature range to avoid thermal runaway or damage.
   • Monitor junction temperature, especially under continuous high current conditions.

5. Storage:

   • Store in original packaging in a dry environment to prevent moisture damage.
   • Observe first-in-first-out (FIFO) inventory practices to minimize storage time.

6. Testing:

   • Perform initial testing at lower voltages and currents to verify correct operation before applying full rated values.

(For reference only)