Details

---

BUY PSD162/08 https://www.utsource.net/itm/p/6528161.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.0	-	5.5	V	Operating supply voltage range
Output Current	IOUT	-	100	250	mA	Continuous output current
Quiescent Current	IQ	-	3	5	渭A	Supply current in standby mode
Dropout Voltage	VDROPOUT	-	200	400	mV	Voltage difference between input and output for regulation
Operating Temp.	TOPR	-40	-	85	掳C	Operating temperature range
Junction Temp.	TjMAX	-	-	150	掳C	Maximum junction temperature

Instructions for PSD162/08:

1. Power Supply Connection:

   • Connect the VDD pin to the positive terminal of your power supply.
   • Ensure the supply voltage is within the specified range (2.0V to 5.5V).

2. Grounding:

   • Connect the GND pin to the common ground of your system.

3. Output Configuration:

   • The OUT pin provides the regulated output voltage. Connect this pin to the load you wish to power.
   • Ensure that the load does not exceed the maximum output current capacity (250mA).

4. Thermal Considerations:

   • Ensure adequate heat dissipation if operating near the maximum output current or in high ambient temperatures.
   • Do not exceed the maximum junction temperature of 150掳C.

5. Stability:

   • For stable operation, place a capacitor of at least 1渭F close to the output pin. This helps in maintaining stability and reducing noise.

6. Handling Precautions:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD).
   • Follow standard ESD precautions when soldering or handling the component.

7. Storage Conditions:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.

(For reference only)