Details

---

BUY PSD36/16 https://www.utsource.net/itm/p/6528210.html
DEVICE CHARACTERISTICS

Parameter	Description	Value	Unit
Part Number	Proportional Solenoid Driver	PSD36/16
Supply Voltage	Operating voltage range	24	V
Current Rating	Continuous current rating	1.5	A
Coil Resistance	Resistance of the solenoid coil	16	惟
Power Rating	Maximum power consumption	36	W
Operating Temp	Temperature range for operation	-40 to +85	掳C
Response Time	Time taken to reach 90% of final position	10	ms
Weight	Product weight	0.5	kg

Instructions:

1. Installation: Ensure that the PSD36/16 is mounted in a well-ventilated area to avoid overheating. Use appropriate mounting hardware suitable for the application environment.
2. Wiring: Connect the supply voltage leads to the designated terminals on the PSD36/16. Verify polarity before applying power.
3. Power Supply: The device operates within a 24V DC supply range. Ensure the power supply meets this requirement and has adequate current capacity.
4. Operation: Gradually increase the input signal to the desired level. Monitor the performance and adjust as necessary.
5. Maintenance: Regularly inspect connections and mounting points for signs of wear or damage. Clean the unit as needed, ensuring it is powered off during cleaning.
6. Troubleshooting: If the device does not operate correctly, check all connections and the power supply. Refer to the troubleshooting section in the user manual for more detailed guidance.

(For reference only)