Details

---

BUY MIG10Q906H https://www.utsource.net/itm/p/6528263.html
HIGH POWER SWITCHING APPLICATIONS MOTOR CONTROL APPLICATIONS

Parameter	Description	Value	Unit
Part Number	Full part identification	MIG10Q906H	-
Type	Device type	MOSFET	-
Configuration	Channel type	N-channel	-
VDS (Drain-Source Voltage)	Maximum voltage between drain and source	100	V
RDS(on) (On-State Resistance)	Resistance when fully on at specified conditions	9.0	mΩ
ID (Continuous Drain Current)	Continuous current through the drain	9.0	A
PD (Power Dissipation)	Maximum power dissipation	370	mW
Package	Component packaging type	SOT-23	-
Operating Temperature	Range of temperatures for operation	-55 to 150	°C

Instructions for Use:

1. Handling Precautions: The MIG10Q906H is sensitive to electrostatic discharge (ESD). Use appropriate ESD protection measures during handling and installation.
2. Mounting: Ensure proper mounting to avoid mechanical stress on the device. Follow the manufacturer's guidelines for soldering temperature and duration.
3. Thermal Management: Given its power dissipation capabilities, ensure adequate heat sinking or cooling if operating near maximum power levels.
4. Electrical Connections: Verify that all connections are secure and correctly wired according to the circuit diagram. Pay special attention to the polarity of connections.
5. Testing: After installation, perform a thorough testing procedure to ensure the device operates within specified parameters.
6. Storage: Store in a dry environment away from direct sunlight and extreme temperatures to prevent damage.

For detailed specifications and application notes, refer to the official datasheet provided by the manufacturer.

(For reference only)