Details

---

BUY LA55-TP/SP9 https://www.utsource.net/itm/p/6528433.html
Current Transducer LA 55-TP

Parameter	Description	Value	Unit
Part Number	Full part number	LA55-TP/SP9
Type	Relay type	SPDT
Coil Voltage	Nominal coil voltage	24	V DC
Coil Power	Coil power consumption	0.72	W
Coil Resistance	Coil resistance	330	惟
Contact Form	Contact configuration	1C.O. (SPDT)
Contact Material	Contact material	AgSnO2
Contact Rating	Switching capacity	10A, 250VAC
Insulation Voltage	Dielectric strength between contacts and coil	1500	V AC
Operating Temp.	Operating temperature range	-40 to +85	掳C
Storage Temp.	Storage temperature range	-40 to +85	掳C
Weight	Weight	10	g

Instructions for Use:

1. Installation:

   • Ensure the relay is mounted on a flat surface.
   • Secure the relay using appropriate mounting hardware provided or recommended by the manufacturer.

2. Electrical Connections:

   • Connect the coil terminals to the control circuit ensuring correct polarity for DC operation.
   • Connect load wiring to the common (COM) and normally open (NO) or normally closed (NC) terminals as required.

3. Operational Testing:

   • Apply nominal voltage to the coil terminals to test switching functionality.
   • Verify that the contacts switch correctly with no arcing or excessive heat generation.

4. Maintenance:

   • Periodically inspect connections for tightness and corrosion.
   • Ensure the operating environment does not exceed specified temperature limits.

5. Disposal:

   • Follow local regulations for disposal of electronic components.
   • Recycle where possible according to environmental guidelines.

(For reference only)