Details

---

BUY SKIIP83AHB15T1 https://www.utsource.net/itm/p/6528522.html
2-pack - integrated intelligent Power System

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Blocking Voltage	VRRM	Repetitive Peak	-	1200	-	V
RMS Voltage	VRMS		-	849	-	V
Non-repetitive Peak	VM	Surge	-	1600	-	V
Average Rectified	IFAV	Forward Current	-	15	-	A
Peak Surge	IFSM	Non-repetitive	-	300	-	A
Reverse Recovery Time	trr	@ IF = 15A, dIT/dt	-	65	-	ns
Junction Temperature	Tj	Operating Range	-40	-	150	掳C

Instructions for SKIIP83AHB15T1:

1. Installation and Handling:

   • Handle with care to avoid damage to the device.
   • Ensure proper heat sinking if operating at high current or temperature.

2. Mounting:

   • Mount the device on a flat surface to ensure good thermal contact.
   • Use appropriate torque when tightening screws to prevent damage.

3. Electrical Connections:

   • Connect the rectifier in series with the load to ensure correct operation.
   • Ensure all connections are tight and secure to prevent arcing or overheating.

4. Thermal Management:

   • Keep the junction temperature within the specified range (-40掳C to 150掳C).
   • Use adequate cooling methods such as heatsinks or forced air cooling.

5. Surge Protection:

   • The device can handle non-repetitive peak surge currents up to 300A.
   • Ensure that surge conditions do not exceed this limit to avoid damage.

6. Reverse Voltage Protection:

   • Ensure that the reverse voltage does not exceed the maximum blocking voltage of 1200V.
   • Consider using additional protection circuits if necessary.

7. Testing:

   • Test the device under controlled conditions before deploying in actual applications.
   • Verify all electrical parameters match the specifications provided.

8. Storage:

   • Store in a dry, cool place away from direct sunlight and corrosive substances.
   • Follow anti-static precautions to protect against ESD damage.

(For reference only)