Details

---

BUY BSM200GB60DLC https://www.utsource.net/itm/p/6528564.html
Technicshe Information

Parameter	Symbol	Min	Typ	Max	Unit	Description
Blocking Voltage	VDSS			600	V	Drain-to-Source voltage
Continuous Drain Current	ID		200		A	Continuous drain current at TC = 25掳C
Pulse Drain Current	IDM		400		A	Pulse drain current (10 渭s, repetition rate 1%)
Gate Threshold Voltage	VGS(th)	2.0	4.0	6.0	V	Gate threshold voltage
On-State Resistance	RDS(on)		0.038		惟	On-state resistance at VGS = 10V, TC = 25掳C
Total Gate Charge	QG		140		nC	Total gate charge
Input Capacitance	Ciss		7200		pF	Input capacitance at VDS = 400V
Output Capacitance	Coss		950		pF	Output capacitance at VDS = 400V
Reverse Transfer Capacitance	Crss		150		pF	Reverse transfer capacitance at VDS = 400V

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper heat sinking to manage the power dissipation effectively.
   • Handle with care to avoid damage to the terminals.

2. Electrical Connections:

   • Connect the drain terminal to the high voltage side of the circuit.
   • Connect the source terminal to the low voltage side or ground.
   • Apply gate signals relative to the source terminal.

3. Operating Conditions:

   • Do not exceed the maximum ratings provided in the table.
   • Ensure the operating temperature range is within -55掳C to +150掳C.
   • For pulse operation, ensure that the pulse width and duty cycle are within safe limits to prevent overheating.

4. Storage:

   • Store in a dry environment to prevent moisture damage.
   • Keep away from direct sunlight and sources of heat.

5. Testing:

   • Before installation, perform a basic test to check the continuity between the drain and source when the gate is properly biased.
   • Verify the blocking voltage capability under no-load conditions.

6. Safety Precautions:

   • Always use appropriate personal protective equipment when handling high voltage components.
   • Ensure that all connections are secure to prevent accidental short circuits.

(For reference only)