Details

---

BUY MBR60035CTL https://www.utsource.net/itm/p/6528591.html
SCHOTTKY DIODES MODULE TYPE 600A

Parameter	Symbol	Value	Unit	Conditions/Notes
Maximum Repetitive Peak Reverse Voltage	VRRM	600	V	Repetitive peak reverse voltage
Maximum RMS Voltage	VRMS	424	V	RMS voltage
Maximum Average Rectified Output Current (at T_A = +75掳C)	Io	35	A	Continuous wave
Maximum Average Rectified Output Current (at T_A = +85掳C)	Io	31.5	A	Continuous wave
Maximum Non-repetitive Peak Surge Current	IFSM	300	A	t = 10ms, IFSM = 2 x Io
Junction Temperature Range	TJ	-55 to +175	掳C	Operating temperature range
Storage Temperature Range	TSTG	-55 to +175	掳C	Storage temperature range
Total Device Dissipation	Ptot	250	W	TC = +75掳C

Instructions for Use:

1. Installation and Handling:

   • Handle the MBR60035CTL with care to avoid damage to the leads and body.
   • Ensure proper heat sinking if operating near maximum current and temperature limits.

2. Electrical Connections:

   • Connect the rectifier in circuits where a high surge current capability is required.
   • Ensure correct polarity when installing; connect the anode to the higher potential and the cathode to the lower potential.

3. Thermal Management:

   • For applications requiring operation at or near maximum average rectified output current, ensure adequate heat dissipation to maintain junction temperatures within specified limits.

4. Surge Current Considerations:

   • The device can handle non-repetitive peak surge currents up to 300A for short durations (e.g., 10ms). Ensure that surge conditions do not exceed these limits to prevent damage.

5. Environmental Considerations:

   • Operate and store the device within the specified temperature ranges to ensure reliable performance and longevity.

6. Safety Precautions:

   • Follow all safety guidelines for handling high-voltage and high-current components.
   • Ensure proper insulation and isolation in the circuit design to protect against electrical hazards.

(For reference only)