Details

---

BUY J2-Q06B-E https://www.utsource.net/itm/p/6528609.html
NULL

Parameter	Description	Value	Unit
Part Number	Identifier for the component	J2-Q06B-E	-
Type	Type of device	Relay	-
Coil Voltage	Voltage required to energize the relay coil	12	V
Coil Current	Current drawn by the relay coil when energized	30	mA
Contact Form	Configuration of relay contacts	SPDT	-
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250VAC	A, VAC
Insulation Voltage	Dielectric strength between contacts	2500	V
Operating Temp.	Temperature range for reliable operation	-40 to +85	掳C
Mounting Style	Method of attaching the relay to a PCB or chassis	Surface Mount	-

Instructions:

1. Installation:

   • Ensure the relay is installed in an environment that meets the operating temperature range.
   • Use appropriate mounting techniques suitable for surface mount components.

2. Power Supply:

   • Connect the specified coil voltage to energize the relay.
   • Verify that the power supply can provide the necessary current as indicated by the coil current parameter.

3. Wiring Connections:

   • Connect the load to the common (COM) and normally open (NO) or normally closed (NC) terminals based on the application requirement.
   • Ensure that the load current does not exceed the contact rating.

4. Safety Precautions:

   • Do not exceed the insulation voltage to prevent damage to the relay.
   • Handle with care to avoid physical damage during installation.

5. Testing:

   • After installation, test the relay operation under no-load conditions first.
   • Gradually increase the load while monitoring performance and safety parameters.

(For reference only)