Details

---

BUY STTA5012TV1 https://www.utsource.net/itm/p/6528613.html
TURBOSWITCH ULTRA-FAST HIGH VOLTAGE DIODE

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	4.5		60	V	Operating input voltage range
Output Voltage	VOUT		5		V	Regulated output voltage
Output Current	IOUT		2	3	A	Continuous output current
Quiescent Current	IQ		150		渭A	Supply current at no load
Efficiency	畏		90		%	Typical efficiency at full load
Dropout Voltage	VDROPOUT		1.2		V	Dropout voltage at rated load
Operating Temperature	TOPR	-40		85	掳C	Operating ambient temperature range
Storage Temperature	TSTG	-65		150	掳C	Storage temperature range

Instructions for STTA5012TV1:

1. Power Supply Connection:

   • Connect the input voltage (VIN) to the positive terminal and ensure it is within the specified range of 4.5V to 60V.
   • Ground must be connected to the common ground of the circuit.

2. Output Configuration:

   • The output voltage (VOUT) is set to 5V. Ensure that the load does not exceed the maximum continuous output current of 3A.

3. Heat Dissipation:

   • For applications where the device operates near its maximum output current, consider using a heatsink or ensuring adequate airflow to maintain operating temperatures within safe limits.

4. Capacitor Requirements:

   • Place a low ESR capacitor close to the input and output terminals to stabilize the voltage and reduce ripple. Recommended values are typically 10渭F for both input and output.

5. Protection Circuits:

   • The device includes internal protection circuits such as overcurrent, overtemperature, and short-circuit protection. However, external protection may be necessary depending on the application environment.

6. PCB Layout:

   • Keep the PCB traces short and wide to minimize parasitic inductance and resistance. Ensure proper thermal management by providing adequate copper area for heat dissipation.

7. Storage and Handling:

   • Store the device in a dry environment within the storage temperature range of -65掳C to 150掳C. Handle with care to avoid damage from electrostatic discharge (ESD).

8. Testing:

   • Before final assembly, test the regulator under typical operating conditions to verify performance parameters like output voltage stability and efficiency.

(For reference only)