Details

---

BUY VHF36-12IO5 https://www.utsource.net/itm/p/6528670.html
Half Controlled Single Phase Rectifier Bridge

Parameter	Description	Value
Part Number	Unique identifier for the component	VHF36-12IO5
Type	Category of the device	Voltage Regulator
Input Voltage (Min)	Minimum input voltage required for operation	4.5V
Input Voltage (Max)	Maximum input voltage the device can handle	18V
Output Voltage	Stable output voltage provided by the regulator	12V
Output Current (Max)	Maximum current that can be supplied	5A
Operating Temperature (Min)	Minimum operational temperature	-40掳C
Operating Temperature (Max)	Maximum operational temperature	85掳C
Package/Case	Physical dimensions and pin configuration	TO-220
Mounting Type	Method of attaching the component to a circuit	Through Hole

Instructions:

1. Installation:

   • Ensure the input voltage is within the specified range (4.5V to 18V).
   • Connect the input voltage to the IN pin and ground to the GND pin.
   • Connect the load to the OUT pin and ensure it does not exceed the maximum output current of 5A.

2. Heat Management:

   • Given the potential for high current, consider using a heatsink if operating near the maximum output current to maintain optimal temperature.

3. Operating Environment:

   • Ensure the ambient temperature remains within -40掳C to 85掳C for reliable operation.
   • Avoid exposing the device to environments with excessive moisture or corrosive substances.

4. Testing:

   • After installation, verify the output voltage is stable at 12V under no-load and full-load conditions.
   • Check for any abnormal heating during operation, which may indicate improper installation or overloading.

(For reference only)