Details

---

BUY PD10M440H https://www.utsource.net/itm/p/6528759.html
MOSFET MODULE DUAL 85A 450V/500V

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	2.7	-	5.5	V
Input Voltage	VIN	Operating	-0.3	-	VDD+0.3	V
Output Voltage	VOUT	High Level	0.8*VDD	-	VDD-0.1	V
		Low Level	-0.3	-	0.4	V
Input Leakage Current	IIL	VIN = VDD, TA = 25掳C	-	1	-	渭A
Output Current	IOH	VOUT = VDD-0.1V	-	8	-	mA
	IOL	VOUT = 0.4V	-	16	-	mA
Propagation Delay	tpd	VDD = 5V, TA = 25掳C	-	8	-	ns

Instructions for PD10M440H:

1. Power Supply: Ensure the supply voltage (VDD) is within the specified range of 2.7V to 5.5V.
2. Input Signal Handling: The input voltage (VIN) should not exceed VDD + 0.3V or go below -0.3V to prevent damage to the device.
3. Output Voltage Levels:
   • For high output level, VOUT should be between 0.8 * VDD and VDD - 0.1V.
   • For low output level, VOUT should be between -0.3V and 0.4V.
4. Current Specifications:
   • Input leakage current should not exceed 1渭A at 25掳C ambient temperature.
   • Ensure the output can source up to 8mA (IOH) when VOUT is VDD - 0.1V.
   • Ensure the output can sink up to 16mA (IOL) when VOUT is 0.4V.
5. Propagation Delay: At a supply voltage of 5V and an ambient temperature of 25掳C, the typical propagation delay (tpd) is 8ns.

Note: Always refer to the specific datasheet for detailed information and ensure environmental conditions are suitable for the device's operation.

(For reference only)