Details

---

BUY 7MBR50U2P060 https://www.utsource.net/itm/p/6528785.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Reverse Voltage	VR	-	50	-	V
Average Rectified Current	Io	-	2	-	A	Tc = 100掳C
Peak Forward Surge Current	Ifsm	-	300	-	A	tp = 8.3 ms, sin half-wave
Forward Voltage Drop	VF	-	0.7	-	V	Io = 1 A, Tc = 25掳C
Junction Capacitance	Cj	-	400	-	pF	Vr = 0 V, f = 1 MHz
Operating Temperature Range	Topr	-55	-	150	掳C
Storage Temperature Range	Tstg	-55	-	150	掳C

Instructions for Use:

1. Handling Precautions:

   • Ensure that the device is handled with care to avoid damage from electrostatic discharge (ESD).
   • Use proper anti-static wrist straps and mats during handling.

2. Mounting:

   • Mount the component on a heat sink if operating at high current levels or in high ambient temperatures.
   • Ensure good thermal contact between the device and the heat sink for efficient heat dissipation.

3. Soldering:

   • Preheat components to reduce thermal shock.
   • Use a soldering temperature of 260掳C maximum for a duration not exceeding 10 seconds per joint.
   • Avoid excessive heating which can damage the device.

4. Electrical Connections:

   • Connect the device according to the circuit diagram provided in your design documentation.
   • Ensure correct polarity when connecting the rectifier diode to avoid reverse breakdown.

5. Testing:

   • Perform initial testing under controlled conditions to verify performance parameters.
   • Monitor temperature and current ratings during operation to ensure they remain within specified limits.

6. Environmental Considerations:

   • Operate within the specified temperature range to maintain reliability.
   • Protect against moisture and corrosive environments which can degrade performance.

7. Storage:

   • Store in a cool, dry place away from direct sunlight.
   • Keep in original packaging until ready for use to prevent physical damage.

(For reference only)