Details

---

BUY RM10TA-H https://www.utsource.net/itm/p/6528821.html
MEDIUM POWER GENERAL USE INSULATED TYPE

Parameter	Description	Value
Part Number	Device Identifier	RM10TA-H
Type	Relay Type	Latching Relay
Coil Voltage	Voltage required to energize the relay coil	5V, 12V, 24V
Coil Current	Current drawn by the relay coil when energized	60mA (Typical)
Contact Form	Configuration of the relay contacts	SPDT
Contact Rating	Maximum current and voltage the contacts can switch	10A, 250VAC
Insulation Voltage	Dielectric strength between contacts and coil	2500VAC
Operating Temp.	Temperature range for reliable operation	-40掳C to +85掳C
Mechanical Life	Number of operations before mechanical failure	10 million cycles
Electrical Life	Number of operations before electrical failure	100 thousand cycles

Instructions for Use:

1. Installation:

   • Ensure the relay is installed in a location that meets the operating temperature requirements.
   • Secure the relay using the provided mounting hardware.

2. Wiring:

   • Connect the coil terminals to the appropriate control circuit based on the desired coil voltage.
   • Wire the common (COM), normally open (NO), and normally closed (NC) contacts as needed for your application.

3. Operation:

   • Apply the specified coil voltage to activate the relay. The contacts will switch to the corresponding state (NO or NC).
   • Ensure not to exceed the contact rating to prevent damage to the relay.

4. Maintenance:

   • Regularly inspect the relay for any signs of wear or damage.
   • Avoid exposing the relay to environments with excessive dust, moisture, or corrosive gases.

5. Safety:

   • Always disconnect power before performing any maintenance or wiring changes.
   • Follow all local electrical codes and safety guidelines.

(For reference only)