Details

---

BUY B25DS120D https://www.utsource.net/itm/p/6528831.html
THYRISTOR MODULE|SCR DOUBLER|1.2KV VRRM|25A IT

Parameter	Symbol	Min	Typ	Max	Unit	Description
Breakdown Voltage	BVdss	-	-	120	V	Drain-Source Breakdown Voltage
Continuous Drain	Id	-	25	-	A	Continuous Drain Current at Tc=25掳C
Pulse Drain	Ipp	-	75	-	A	Pulse Drain Current (t=10渭s, Rg=1惟)
Gate Threshold	Vgs(th)	2.0	4.0	6.0	V	Gate Threshold Voltage
On-State Resistance	Rds(on)	-	0.035	-	惟	On-State Resistance at Vgs=10V, Id=25A
Input Capacitance	Ciss	-	500	-	pF	Input Capacitance
Total Gate Charge	Qg	-	20	-	nC	Total Gate Charge

Instructions for B25DS120D:

1. Handling and Storage:

   • Store in a dry, cool place.
   • Handle with care to avoid damage to the leads and body.

2. Mounting:

   • Ensure proper heat sinking if operating near maximum current or power dissipation.
   • Use appropriate mounting hardware to secure the device.

3. Biasing:

   • Apply gate voltage carefully; do not exceed the maximum gate-source voltage rating.
   • Use a series resistor on the gate to limit inrush currents during switching.

4. Operation:

   • Operate within specified temperature and voltage limits to ensure reliability.
   • For pulse applications, ensure pulse width and frequency are within safe operating area (SOA).

5. Testing:

   • Refer to datasheet for specific test conditions and procedures.
   • Ensure all tests are conducted under controlled conditions to prevent damage.

6. Safety:

   • Always disconnect power before making adjustments or measurements.
   • Follow all relevant safety guidelines when handling high voltages and currents.

(For reference only)