Details

---

BUY IRKU91/12A https://www.utsource.net/itm/p/6528895.html
400V 95A Center-Tap Common Cathode Phase Control Thyristor/Thyristor in a ADD-A-Pak package

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD		12		V	Operating supply voltage
Output Current	IOUT		1.5		A	Continuous output current
Quiescent Current	IQ		0.5		mA	Current consumed by the regulator
Dropout Voltage	VDROPOUT		1.2		V	Voltage difference between input and output at dropout
Load Regulation			0.5		%	Change in output voltage with load
Line Regulation			0.3		%	Change in output voltage with input
Ripple Rejection			60		dB	Attenuation of ripple on output
Operating Temperature	TOPR	-40		85	掳C	Operating temperature range
Storage Temperature	TSTG	-65		150	掳C	Storage temperature range

Instructions for Use:

1. Power Supply Connection: Connect the supply voltage (VDD) to the appropriate power source ensuring it is within the specified operating range.
2. Output Configuration: Ensure the load connected to the output does not exceed the maximum continuous output current (IOUT).
3. Thermal Considerations: Monitor the operating temperature to avoid exceeding the maximum operating temperature (TOPR). Provide adequate heat sinking if necessary.
4. Input Capacitor: Place a capacitor close to the input pin to stabilize the input voltage and reduce noise.
5. Output Capacitor: Include an output capacitor to improve transient response and stability.
6. PCB Layout: Pay attention to the PCB layout to minimize noise and ensure stable operation. Keep traces short and direct, especially for high-frequency applications.
7. Handling Precautions: Handle the component with care to prevent damage from electrostatic discharge (ESD). Follow proper ESD handling procedures.

Note: The IRKU91/12A is a hypothetical part used for demonstration purposes. Always refer to the manufacturer's datasheet for precise specifications and detailed instructions.

(For reference only)