Details

---

BUY VUO62-12NO7 https://www.utsource.net/itm/p/6528974.html
Three Phase Rectifier Bridge

Parameter	Description	Value
Part Number	Unique identifier for the component	VUO62-12NO7
Type	Type of electronic component	Relay
Coil Voltage	Voltage required to activate the relay	12V DC
Coil Resistance	Resistance of the coil	700 Ohms
Contact Form	Configuration of the relay contacts	SPDT (Single Pole Double Throw)
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250V AC
Insulation Voltage	Maximum voltage between contacts	1000V
Operating Temp.	Temperature range for reliable operation	-40掳C to +85掳C
Package/Case	Physical dimensions or packaging type	DIP (Dual Inline Package)
Mounting Style	Method of mounting the component	Through Hole

Instructions:

1. Installation: Ensure that the relay is installed in a location where it will not be subjected to excessive heat, moisture, or mechanical stress. Use the appropriate soldering techniques for through-hole components.
2. Power Supply: Connect the coil terminals to a 12V DC power supply to operate the relay. Verify the polarity if the relay is sensitive to it.
3. Load Connection: Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts based on your application requirements.
4. Testing: After installation, test the relay by applying the rated coil voltage and verifying that the contacts switch as expected.
5. Maintenance: Regularly inspect the relay for signs of wear or damage. Clean the contacts if necessary using a soft, dry brush or compressed air.
6. Safety Precautions: Always disconnect power before handling the relay to avoid electrical shock. Ensure that the relay's insulation voltage rating is suitable for your application to prevent electrical hazards.

(For reference only)