Details

---

BUY TT25N14KOF https://www.utsource.net/itm/p/6529315.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	V_IN			40	V	Maximum input voltage
Output Voltage	V_OUT	1.2		13.2	V	Adjustable output voltage range
Output Current	I_OUT		1.5		A	Continuous output current
Quiescent Current	I_Q		60		渭A	Typical quiescent current
Dropout Voltage	V_DROPOUT		1.2		V	Typical dropout voltage at full load
Operating Temperature	T_OP	-40		85	掳C	Operating temperature range
Storage Temperature	T_STG	-65		150	掳C	Storage temperature range

Instructions for TT25N14KOF

1. Input Connection:

   • Connect the input terminal of the regulator to a power source within the specified input voltage range (up to 40V).

2. Output Configuration:

   • For adjustable output voltage, connect an external resistor network between the ADJ pin and GND, and from ADJ to OUT.
   • Ensure the output voltage is set within the 1.2V to 13.2V range.

3. Capacitor Requirements:

   • Use input and output capacitors as recommended in the datasheet to stabilize the regulator and reduce ripple.
   • Typically, a 1渭F ceramic capacitor on the input and a 10渭F electrolytic capacitor on the output are sufficient.

4. Thermal Considerations:

   • Ensure adequate heat dissipation if operating near the maximum output current or in high ambient temperatures.
   • Mount the device on a heatsink if necessary to maintain operating temperature within limits.

5. Handling Precautions:

   • Avoid exposing the device to temperatures outside the storage temperature range (-65掳C to 150掳C).
   • Handle with care to prevent damage from electrostatic discharge (ESD).

6. Installation:

   • Follow the manufacturer's guidelines for PCB layout and mounting to ensure optimal performance and reliability.

Note: Always refer to the latest datasheet provided by the manufacturer for detailed specifications and additional guidelines.

(For reference only)