Details

---

BUY 25FXF12 https://www.utsource.net/itm/p/6529348.html

Parameter	Description	Value
Package Type	Package type of the component	SOIC-8
Operating Voltage Range	Range of voltages at which the device can operate	1.7V to 3.6V
Memory Density	Total memory available in the device	128 Mbit
Organization	How the memory is organized	16M x 8
Data Retention Time	Duration data is retained	20 years
Write Cycle Time	Time required for a write cycle	5ms
Page Program Time	Time to program one page	5ms
Block Erase Time	Time to erase one block	35ms
Endurance	Number of program/erase cycles	100,000 cycles
Temperature Range	Operating temperature range	-40掳C to 85掳C
Interface	Communication interface used	SPI

Instructions for Use:

1. Power Supply Requirements: Ensure the power supply voltage is within the operating voltage range (1.7V to 3.6V) to avoid damage to the device.
2. Initialization: Before performing any read or write operations, initialize the device using the appropriate SPI commands.
3. Write Operations: Perform write operations by first sending a Write Enable command followed by the desired write command (e.g., Page Program).
4. Erase Operations: To erase a block, send a Write Enable command followed by the Block Erase command and the address of the block to be erased.
5. Read Operations: Execute read commands by providing the start address and then reading the data from the serial data output pin.
6. Data Integrity: After each write or erase operation, check the status register to ensure the operation was successful before proceeding with subsequent commands.
7. Handling: Handle the device with care to prevent electrostatic discharge (ESD) damage; use proper ESD precautions.

(For reference only)