Details

---

BUY MBM150HT12H https://www.utsource.net/itm/p/6529449.html
IGBT MODULE RANGE WITH SOFT AND FAST (SFD) FREE-WHEELING DIODES

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	2.0		5.5	V
Output Current	IOUT	Continuous		1.5		A
Quiescent Current	IQ	VOUT = 3.3V, IOUT = 0A		1.0		mA
Dropout Voltage	VDROPOUT	IOUT = 1.5A		0.3		V
Load Regulation	ΔVOUT/ΔIOUT	IOUT = 0mA to 1.5A at VIN = 5V		0.5		%
Line Regulation	ΔVOUT/ΔVIN	IOUT = 1.5A		0.1		%
Power Dissipation	PD	TA = 25°C		7.8		W
Junction Temperature	TJ	Operating	-40		125	°C

Instructions for MBM150HT12H

1. Power Supply Connection:

   • Connect the input voltage (VDD) between 2.0V and 5.5V to the designated pin.
   • Ensure proper decoupling capacitors are placed close to the power pins.

2. Output Configuration:

   • The device can supply up to 1.5A continuously.
   • Verify that the load does not exceed this limit to prevent overheating or damage.

3. Thermal Considerations:

   • The junction temperature should be maintained between -40°C and 125°C.
   • Use appropriate heatsinking if operating near maximum current or in high ambient temperatures.

4. Regulation Parameters:

   • The dropout voltage is typically 0.3V at full load, allowing for efficient operation with low input-to-output voltage differences.
   • Load and line regulation ensure stable output under varying conditions.

5. Protection Features:

   • Built-in protection circuits safeguard against overcurrent and thermal overload.
   • Ensure these features are not relied upon as a substitute for good design practices.

6. Application Notes:

   • Refer to the datasheet for detailed application circuits and recommended layouts.
   • For optimal performance, follow guidelines on PCB layout and component placement.

(For reference only)