Details

---

BUY APT2X60D100J https://www.utsource.net/itm/p/6529550.html
ULTRAFAST SOFT RECOVERY DUAL RECTIFIER DIODES

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	4.5	-	26	V	Operating input voltage range
Output Voltage	VOUT	1.8	-	5.5	V	Adjustable output voltage range
Output Current	IOUT	-	-	100	mA	Maximum continuous output current
Quiescent Current	IQ	-	10	-	渭A	Typical quiescent current
Dropout Voltage	VDROPOUT	-	300	-	mV	Typical dropout voltage at IOUT
PSRR @ 100kHz	PSRR	-	70	-	dB	Power supply rejection ratio
Operating Temperature	TOPR	-40	-	85	掳C	Operating temperature range
Storage Temperature	TSTG	-65	-	150	掳C	Storage temperature range

Instructions for APT2X60D100J

1. Power Supply Connection:

   • Connect the input voltage (VIN) to a stable power source within the specified range of 4.5V to 26V.
   • Ensure proper bypass capacitors are placed close to the input and output pins to maintain stability.

2. Output Configuration:

   • Adjust the output voltage (VOUT) using external resistors according to the datasheet formula if adjustable.
   • Verify that the load does not exceed the maximum output current of 100mA.

3. Thermal Considerations:

   • Place the device in an area with adequate airflow or heat sinking if operating near the upper limits of temperature or current.
   • Monitor the operating temperature to ensure it remains within the specified range of -40掳C to 85掳C.

4. Transient Protection:

   • Include transient voltage suppressors or clamping diodes as necessary to protect against voltage spikes.

5. Layout Guidelines:

   • Follow recommended PCB layout guidelines to minimize noise and improve performance.
   • Keep traces short and direct, especially for high-frequency components like the input and output capacitors.

6. Storage:

   • Store the device in a controlled environment within the storage temperature range of -65掳C to 150掳C to avoid damage.

Note: Always refer to the manufacturer's datasheet for detailed specifications and application notes specific to your design requirements.

(For reference only)