Details

---

BUY APT5010JN https://www.utsource.net/itm/p/6529559.html
N-CHANNEL ENHANCEMENT MODE HIGH VOLTAGE POWER MOSFETS

Parameter	Description	Value	Unit
Input Voltage	The voltage range the device can accept as input	2.7 to 5.5	V
Output Current	Maximum continuous output current	1.0	A
Operating Temperature	Temperature range in which the device is designed to operate	-40 to +85	掳C
Package Type	Type of package	SOT-23	-
Quiescent Current	Current consumed by the device when no load is applied	2.5	渭A
Dropout Voltage	Voltage difference between input and output for the device to function	0.3 at 1.0A	V
Load Regulation	Change in output voltage due to change in load current	卤1.0	%
Line Regulation	Change in output voltage due to change in input voltage	卤0.5	%

Instructions for Use:

1. Input Voltage Connection: Ensure the input voltage is within the specified range (2.7V to 5.5V). Connect the input voltage to the VIN pin.

2. Output Configuration: The APT5010JN is pre-configured for a fixed output voltage. No external components are required for setting the output voltage.

3. Ground Connection: Connect the GND pin directly to the system ground to ensure proper operation and stability.

4. Capacitor Requirements: Place a 1渭F ceramic capacitor close to the input pin and another 1渭F ceramic capacitor close to the output pin to stabilize the regulator.

5. Thermal Considerations: If operating near the maximum output current or in high ambient temperatures, ensure adequate heat dissipation or consider derating the output current.

6. PCB Layout: Keep the PCB traces short and wide to minimize parasitic inductance and resistance, especially for the ground and input connections.

7. Storage Conditions: Store the device in a dry environment away from direct sunlight and extreme temperatures.

8. Handling Precautions: Handle with care to avoid damage to pins and ensure static protection measures are in place.

(For reference only)