Details

---

BUY 35MB120A https://www.utsource.net/itm/p/6529575.html
10 to 35 Amp Rectifier Bridges

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Operating	4.5	-	20	V
Output Voltage	VOUT	Fixed	-	3.3	-	V
Output Current	IOUT	Continuous	-	1.2	-	A
Quiescent Current	IQ	VIN = 5V, No Load	-	2	-	mA
Dropout Voltage	VDROPOUT	IOUT = 1.2A	-	1.2	-	V
PSRR (Power Supply Rejection Ratio)	PSRR	@ 1kHz	-	70	-	dB
Thermal Shutdown	TSD	Typical	-	160	-	掳C
Operating Temperature	TOPR	Range	-40	-	85	掳C

Instructions for Use:

1. Input Voltage: Ensure the input voltage is within the range of 4.5V to 20V to avoid damage or improper operation.
2. Output Configuration: The output voltage is fixed at 3.3V and does not require external components for setting the output voltage.
3. Load Connection: Connect the load directly to the output terminals ensuring the current draw does not exceed 1.2A continuously.
4. Heat Management: Monitor the operating temperature to ensure it stays below 85掳C. The device has a thermal shutdown feature that activates at approximately 160掳C.
5. Noise Reduction: For optimal performance, place a bypass capacitor close to the input and output terminals.
6. Power Supply Ripple Rejection: The device offers good power supply rejection at 1kHz, which helps in maintaining stable output under varying input conditions.

Note: Always refer to the manufacturer's datasheet for detailed specifications and application notes.

(For reference only)