Details

---

BUY MUR20040CT https://www.utsource.net/itm/p/6529605.html
200 Amp Supre Fast Recovery Rectifier 50 to 600 Volts

Parameter	Symbol	Min	Typ	Max	Unit	Description
Forward Voltage	VF	-	1.0	1.2	V	Voltage drop when fully conducting
Reverse Recovery Time	trr	-	35	45	ns	Time taken to switch from on to off state
Peak Reverse Voltage	VRRM	-	-	400	V	Maximum reverse voltage the diode can withstand
Average Rectified Current	IF(AV)	-	2.0	2.0	A	Continuous average forward current at T = 75°C
Surge Current	IFSM	-	80	80	A	Non-repetitive peak forward surge current
Operating Junction Temperature	TJ	-40	-	150	°C	Range of temperatures for proper operation
Storage Temperature	TSTG	-55	-	150	°C	Temperature range for storage

Instructions for MUR20040CT:

1. Installation: Ensure that the diode is properly oriented with correct polarity before installation. The cathode and anode must be correctly identified.
2. Heat Dissipation: Given its maximum operating junction temperature, ensure adequate heat sinking or cooling mechanisms are in place, especially under high current conditions.
3. Voltage Handling: Do not exceed the peak reverse voltage (VRRM) as it can lead to device failure. Always consider a safety margin above the expected reverse voltage in your application.
4. Current Ratings: Operate within the specified average rectified current (IF(AV)) and surge current (IFSM) limits to prevent overheating or damage.
5. Temperature Considerations: Monitor the operating junction temperature (TJ) to avoid exceeding the maximum limit, which could cause premature failure.
6. Storage Conditions: Store in a dry environment within the specified storage temperature range (TSTG) to maintain reliability.
7. Handling Precautions: Handle with care to avoid mechanical damage. Use appropriate ESD protection measures to prevent electrostatic damage during handling.

(For reference only)