Details

---

BUY CM50MD-12H https://www.utsource.net/itm/p/6529612.html
MEDIUM POWER SWITCHING USE INSULATED TYPE

Parameter	Description	Value
Part Number	Component Identifier	CM50MD-12H
Type	Device Classification	Relay
Coil Voltage	Voltage required to energize the relay coil	12V DC
Coil Power	Power consumption of the coil	1.2W
Contact Form	Configuration of relay contacts	SPDT (Single Pole, Double Throw)
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250V AC
Insulation Voltage	Maximum voltage across which insulation is guaranteed	2500V AC
Operating Temp.	Temperature range within which the relay operates reliably	-40°C to +85°C
Mechanical Life	Number of operations before mechanical failure	10 million cycles
Electrical Life	Number of operations before electrical failure	100 thousand cycles

Instructions for Use:

1. Installation: Ensure that the relay is installed in a location where it will not be subjected to excessive vibration or moisture.
2. Coil Connection: Connect the coil terminals to a suitable power supply matching the coil voltage specification.
3. Contact Wiring: Wire the common (COM), normally open (NO), and normally closed (NC) contacts according to your circuit requirements.
4. Testing: Before full deployment, test the relay under load conditions to ensure it operates correctly.
5. Maintenance: Periodically inspect the relay for signs of wear or damage, especially if used in harsh environments.
6. Handling Precautions: Avoid exposing the relay to temperatures outside its operating range and prevent exposure to corrosive substances.

(For reference only)